Representative Work

Structural solutions shaped around architecture.

Selected residential, multifamily, mixed-use, and amenity projects demonstrating coordinated design, practical detailing, and permit-ready structural documentation.

Custom Luxury Residence

Complete structural design for a 15,011 SF residence.

15,011 SFTotal Building Area10,749 SFConditioned AreaGermantown, TNLocation

ARKIA Engineering provided the complete structural engineering design, including the foundation system, wood framing, gravity and lateral force-resisting systems, structural calculations, and permit-ready construction documents. The structural design was coordinated closely with the architect and contractor to accommodate expansive open spaces, large glazed openings, varied roof geometry, and future improvement areas.

Foundation DesignWood FramingGravity & Lateral DesignConstruction Documents

Custom Single-Family Residence

Coordinated structural engineering for a 9,953 SF residence.

9,953 SFTotal Building Area7,026 SFConditioned AreaGermantown, TNLocation

Structural engineering for a custom residence with expansive living areas, large window openings, long-span framing, covered outdoor spaces, a screened porch, pool storage, and a future exercise room. The framing and foundation systems were coordinated with the architectural design to maintain clean interior spaces and practical construction detailing.

Structural DesignFoundation DesignWood FramingConstruction Coordination

Custom Luxury Residence · Franklin, Tennessee

Complete structural design for a 13,388 SF custom residence.

13,388 SFTotal Building Area 8,406 SFConditioned Area Franklin, TNLocation

This 13,388-square-foot custom luxury residence in Franklin, Tennessee, was designed by Arch Point LLC. The two-story residence features structural steel framing with reinforced concrete perimeter shear walls, accommodating expansive open living spaces, long-span framing, extensive glazing, and complex architectural geometry.

The project includes 8,406 square feet of conditioned living area, 2,053 square feet of garage space, 1,473 square feet of balconies, and a 1,456-square-foot greenhouse. ARKIA Engineering provided the complete structural engineering design, including the foundation system, reinforced concrete shear walls, structural steel framing, gravity and lateral force-resisting systems, structural calculations, and permit-ready construction documents.

Structural Steel Concrete Shear Walls Foundation Design Gravity & Lateral Design Construction Documents

Mixed-Use Commercial & Residential · Design Phase

Foundation and structural design for a 24,411 SF mixed-use development.

24,411 SFTotal Building Area3 StoriesResidential + CommercialDesign PhaseProject Status

ARKIA Engineering is providing the foundation and structural design for this mixed-use commercial and residential development. The three-story project combines ground-floor office, retail, residential, and utility spaces with residential uses on the upper floors.

Architect: Shapiro & Company Architects, P.C.
Owner / Developer: McLemore Homes

Mixed-UseFoundation DesignStructural DesignCommercialResidentialDesign Phase

Multifamily Residential · Arlington, Tennessee · Under Construction

Structural design for a 151-unit multifamily residential development.

151 Units114 Stacked Townhomes + 37 Townhomes±15.519 AcresProperty SizeUnder ConstructionProject Status

ARKIA Engineering provided structural engineering design for this multifamily residential development in Arlington, Tennessee. The development includes a combination of stacked townhome and townhome building types.

Architect: Shapiro & Company Architects, P.C.

Multifamily ResidentialStructural DesignTownhomesArlington, TNUnder Construction

Featured Multifamily Work

East End Village Townhomes.

A 24-unit townhome development in Memphis, Tennessee, with coordinated structural systems supporting contemporary architecture, attached garages, covered entries, and rooftop balconies.

East End Village Townhomes · Memphis, Tennessee

Complete structural design for a 62,310 SF, 24-unit development.

62,310 SFTotal Building Area24 UnitsTwo-Story Townhomes45,655 SFConditioned Area

East End Village is a 62,310-square-foot townhome development designed by Shapiro & Company Architects, P.C. and constructed by Griffin Elkington – Barton Thomas. The project includes 45,655 square feet of conditioned living area, 11,210 square feet of attached garages, 1,596 square feet of covered porches and entries, and 3,849 square feet of rooftop balconies.

ARKIA Engineering provided the complete structural engineering design, including the foundation system, wood framing, gravity and lateral force-resisting systems, structural calculations, and permit-ready construction documents, while coordinating closely with the architect and contractor throughout the design process.

TownhomesWood FramingFoundation DesignGravity & Lateral DesignConstruction Documents